The AHP-2A is a 2-axis, computer controlled
automatic punch machine. It is similar in function to the manually
operated machines, but the operator simply loads and unloads the
parts and the machine makes all the necessary movements. The part
programs are stored in a database and recalled as needed, the
database can be backed up to protect against loss. The operator is
guarded by a safety light curtain. Often an end closing machine is
placed in close proximity so that one operator can run both
machines. It also can be automated with a robotic arm.
FEATURES AND
SPECIFICATIONS
MODEL AHP-2A TUBE PUNCH MACHINE
Available in standard bed length of 48” and 72”
Fast, accurate and repeatable
Easy to program, no special knowledge of machine
programming language required
P.C. based controls
No lubricant is needed. Waste material is slug
blown out of tube rather than chips
Includes a light beam locating system for
orienting holes on pre-bent parts
The Carson model CHP-1H manual tube punch machine is a hand
loading, hydraulic punching machine for punching a pattern of holes
in tube, as in the production of manifolds or headers for air
conditioning units. The operator loads the tube onto the mandrel and
clamps the end of the tube in the indexing carriage. This carriage
moves linearly and/or rotates the tube to positions defined by the
linear template (spacer bar) and the rotation template (index
plate). The punch is activated by a hand-operated valve. Slugs are
automatically ejected by air pressure.
The AMP-1A is an automatic tube punching machine
that can be hand loaded or fitted with a robotic arm to achieve
maximum performance. It has two systems specifically designed to
provide safety for operating personnel. These are the stop
motion circuit and the light curtain making this machine
extremely safe while in operation.
The AMP - 1 is capable of punching three hole sizes in one
setup. This is accomplished by means of an indexing punch turret
that has a three punch holding capacity as well as an indexing
mandrel that contain three-die hole sizes. The machine has a
punching capacity of 0.562” to 84.00” from end of tube and can
accept outside diameters of up to 1.63”. This machine can be
programmed for both linear and radial hole positioning as well
as up to three-hole sizes per program.
FEATURES AND
SPECIFICATIONS
Indexing punch turret that has a three-punch
holding capacity
Accept outside diameter tubes of up to 1.63”
Punch capacity of 0.562” to 84.00 from end
of tube
Quick change tooling, changeover can be done
in 2 - 3 minutes
Base - can be bolted down
Has a "nibble' option that allows the
machine to create a clean large diameter hole
Can be integrated with a robotic arm
allowing for an automated process