|
The model TRC-1 Tube End Closing machine is an
extremely fast and simple way to close the ends of copper, aluminum,
brass or mild steel tubes in the range from 1/4" O.D. to 1 3/8" O.D.
The operator manually loads the tube to contact the rotating roller,
then operates the closer handle. The machine automatically takes
over to lock the jaws, move the roller across the tube end as it
spirals around it, return the roller to the starting position,
unlock, and open the jaws to release the work piece. This “cold”
process produces a flat end close of superior strength.
   
   
|
FEATURES AND
SPECIFICATIONS
- Range in tube sizes 1/4” to 1 3/8” O.D.
- Flat end close rather than dome type, resulting
in minimal tube loss
- Simple quick-change tooling schematic
- Process does not heat the tube
- Roller tools and clamp jaws constructed from
hardened tool steel
- Machine footprint is 8’ x 10’ with the operator,
height is 67”
- Requires compressed air 80-100 PSI, 1.5CFM,
electrical power 3 phase, 60 hertz
- RAL colors available
TRC-1
Tube Closing Machine Brochure.pdf |
